What are two requirements when configuring a Fibre Channel SAN with an ESXi 5.x cluster? (Choose two.)
A. RDMs must be zoned and masked to each ESXi 5 host in the cluster
B. A FCP HBA or hardware supporting FCoE must be installed in the hosts
C. Each LUN should contain only one NFS datastore.
D. Each LUN must present a unique LUN ID to each ESXi hosts.
A: correct because yes, you have to Zone and mask to allow only the Hosts in that you want in.
Zoning has the following effects:
– Reduces the number of targets and LUNs presented to a host.
– Controls and isolates paths in a fabric.
– Can prevent non-ESXi systems from accessing a particular storage system, and from possibly destroying
– Can be used to separate different environments, for example, a test from a production environment.
B: correct because yes you need HBAs to connect to the FC.
C is obviously wrong as the FS is VMFS not NFS
D is wrong because: Page 37 of the vSphere storage guide says.
For multipathing to work properly, each LUN must present the “same” LUN ID number to all ESXi hosts.
Where must the VMware vSphere Storage Appliance Manager (VSA Manager) be installed?
A. On a Windows virtual machine created on the first VSA host
B. The VSA Manager is deployed as a separate virtual appliance
C. On a vCenter Server outside of the VSA environment
D. It is pre-installed on the VMware vSphere Storage Appliance
VMware vsphere storage appliance manager is always installed on a vcenter server that resides outside of VSA environment.
Using the vSphere Storage Appliance (VSA) Manager to view the Appliances Status column, what are three valid states? (Choose three.)
A virtual machine requires a 4TB disk for application data. The storage administrator has already created and presented a 4TB LUN to an ESXi 5.x host. The host is currently configured with a single 500GB VMFS5 datastore.
What is the next step the vSphere administrator must use to provision the data disk?
A. Create a virtual compatibility mode RDM mapping to the 4TB LUN.
B. Create a physical compatibility mode RDM mapping to the 4TB LUN.
C. Expand the existing VMFS volume to 4TB. Create a physical compatibility mode RDM mapping to
the 4TB LUN.
D. Expand the existing VMFS volume to 4TB. Create a virtual compatibility mode RDM mapping to the
Which two statements are true about shared storage capabilities on NFS datastores supported by ESXi 5.x? (Choose two.)
A. You can create Fault Tolerant virtual machines
B. You can mount up to 256 NFS datastores
C. You can use VMware Storage APIs with all NFS datastores
D. You can use Storage vMotion from a virtual-mode RDM
http://www.vmware.com/pdf/vsphere5/r50/vsphere-50-configuration-maximums.pdf (page 3, see storage maximums)
A vSphere 5 environment has an ESXi 5 x host configured to boot from a Software iSCSI adapter.
What is the expected outcome if the administrator attempts to disable the iSCSI Software adapter?
A. The adapter will be disabled, but is re-enabled the next time the host boots up.
B. The adapter will be disabled and the host will not boot the next time the host boots up
C. The adapter will not be disabled and the vSphere Client will return an error message
D. The adapter will be enabled, but the host will boot into troubleshooting mode the next time the host boots
A host failure occurs in vSphere HA cluster, but virtual machines from the failed host are not restarted on the surviving nodes in the cluster.
Which two conditions explain this behavior? (Choose two)
A. HA has been configured to use a dedicated failure host, and the failed host is designated failover host.
B. An anti-affinity rule configured and restarting the VMs would place them on the same host.
C. The virtual machines on the failed host are HA disabled.
D. Host Monitoring is disabled
Which two methods can be used to migrate a virtual machine from a vNetwork Standard to a vNetwork Distributed Switch? (Choose two)
A. Edit the virtual adapter settings for the ESXi host and select a dvPort group from the list.
B. Migrate the port group containing the virtual machine from a vNetwork Standard Switch using the
Migrate Virtual machine networking option.
C. Use the Migrate Virtual machine networking option to select the virtual machine from a list of virtual
D. Edit the Network Adapter settings for the virtual machine and select a dvPort group from the list.
An administrator has received calls about a virtual machine experiencing intermittent application issues during the evening. To troubleshoot, the administrator needs to capture the virtual machine in the state it is in during the evening hours for later analysis.
Which two tasks would accomplish this requirement? (Choose two)
A. Create a scheduled task to clone the virtual machine once per evening
B. Create an alarm that is triggered when a loss of VMware Tools heartbeat to the virtual machine occurs.
C. Use esxtop in batch mode and capture metrics during the evening hours.
D. Create a scheduled task to create a snapshot of the virtual machine once per evening
Several virtual machines residing in a resource pool are exhibiting pools and critical virtual machines in the pool appear hung. The resource pool has been allocated exactly 500MHz of CPU and does not have the Expandable Reservation option selected. The cluster in which the resource pool resides has a total of 6000MHz, with 1000MHz available.
Which step can be used to increase the performance of the critical?
A. Increase the CPU limit on the critical virtual machine.
B. Increase the CPU reservations on the critical virtual mach
C. Increase the CPU reservations on the resource pool
D. Increase the CPU limit on the resource pool
If you want to pass the VMware VCP510 exam sucessfully, recommend to read latest VMware VCP510 Dumps full version.
Why Choose Lead2pass?
If you want to pass the exam successfully in first attempt you have to choose the best IT study material provider, in my opinion, Lead2pass is one of the best way to prepare for the exam.
|One Time Purchase||✔||✖||✖||✖||✖|
|100% Pass Guarantee||✔||✖||✖||✖||✖|
|100% Money Back||✔||✖||✖||✖||✖|